SCI Abstract

search
+
Exploring Bhutanese Biology Teachers’ Perceptions of Scientific Models
Exploring Bhutanese Biology Teachers’ Perceptions of Scientific Models
While Bhutanese biology teachers are expected to possess a rich understanding of scientific models, little is known about ...
In-situ formation of nitrogen doped microporous carbon nanospheres derived from polystyrene as lubricant additives for anti-wear and friction reduction
In-situ formation of nitrogen doped microporous carbon nanospheres derived from polystyrene as lubricant additives for anti-wear and friction reduction
This study presents a nitrogen-doped microporous carbon nanospheres (N@MCNs) prepared by a facile polymerization–car...
Molecular design of recyclable thermosetting polyimide and its composite with excellent mechanical and tribological properties
Molecular design of recyclable thermosetting polyimide and its composite with excellent mechanical and tribological properties
Recyclability of thermosetting polymers and their composites is a challenge for alleviating environmental pollution and re...
Research on the mechanism of the two-dimensional ultrasonic surface burnishing process to enhance the wear resistance for aluminum alloy
Research on the mechanism of the two-dimensional ultrasonic surface burnishing process to enhance the wear resistance for aluminum alloy
The gradient nanostructure is machined on the aluminum (Al) alloy by the two-dimensional ultrasonic surface burnishing pro...
Investigation of electrostatically tunable adhesion and instability of flying head slider
Investigation of electrostatically tunable adhesion and instability of flying head slider
The interfacial adhesion between microstructures is inevitable in a micro-electro-mechanical system (e.g., hard disk drive...
Tribological properties and tribomechanism of nickel nanoparticles in-situ synthesized in rapeseed oil
Tribological properties and tribomechanism of nickel nanoparticles in-situ synthesized in rapeseed oil
Nickel (Ni) nanoparticles can be enriched on the surface of iron-based frictional pairs, which provides the possibility to...
Advances in friction of aluminium alloy deep drawing
Advances in friction of aluminium alloy deep drawing
Broad use of lightweight aluminium alloy parts in automobile manufacturing, aerospace, electronic communication, and rail ...
Photoinduced superlubricity on TiO2 surfaces
Photoinduced superlubricity on TiO2 surfaces
Superlubricity control is of great interest in both industry and scientific research, and several methods have been propos...
Advanced Composites
Advanced Composites
This book presents a summary of analysis and modeling techniques used on nanomaterial-based composites as well as their fa...
Trends and Innovations in Energetic Sources, Functional Compounds and Biotechnology
Trends and Innovations in Energetic Sources, Functional Compounds and Biotechnology
This book discusses edge-cutting technologies at different stages of development and offers appropriate levels of presenta...
Novel concept of nano-additive design: PTFE@silica Janus nanoparticles for water lubrication
Novel concept of nano-additive design: PTFE@silica Janus nanoparticles for water lubrication
Polytetrafluoroethylene (PTFE) has been widely used as a lubrication additive for reducing friction and wear; however, the...
A lubrication model for bubbly oil lubrication with interfacial effect and thermal effect using the theory of multiphase mixtures
A lubrication model for bubbly oil lubrication with interfacial effect and thermal effect using the theory of multiphase mixtures
Bubbly oil lubrication is a type of lubrication method. However, the lubrication model of the bubbly oil has not been thor...
A numerical model to simulate the transient frictional viscoelastic sliding contact
A numerical model to simulate the transient frictional viscoelastic sliding contact
Sliding motion has always been one of the major concerns when it comes to the analysis of viscoelastic contact problems. A...
Development of wet adhesion of honeybee arolium incorporated polygonal structure with three-phase composite interfaces
Development of wet adhesion of honeybee arolium incorporated polygonal structure with three-phase composite interfaces
Inspired by the dynamic wet adhesive systems in nature, various artificial adhesive surfaces have been developed but still...
A review of recent advances in the effects of surface and interface properties on marine propellers
A review of recent advances in the effects of surface and interface properties on marine propellers
Marine propellers are important propulsion devices for both surface ships and underwater vehicles. Increasingly severe env...
Tribological properties of low-temperature time-dependent pretreated graphite for mechanical seal pairs in high-speed turbopump
Tribological properties of low-temperature time-dependent pretreated graphite for mechanical seal pairs in high-speed turbopump
The friction coefficient and wear rate of pretreated graphite with liquid nitrogen were obtained by using a ball-on-disk t...
Recent Advances in Functional Materials and Devices
Recent Advances in Functional Materials and Devices
This book covers the latest research in the area of functional materials and various functional materials for device appli...
Advanced Materials for Multidisciplinary Applications
Advanced Materials for Multidisciplinary Applications
This book presents recent research in advanced materials for improving human healthcare, protecting the environment and al...
Pyrochlore Oxides
Pyrochlore Oxides
This book presents an in-depth exploration of complex metal oxides, focusing on their applications in photocatalysis and b...
Indian Metallurgy
Indian Metallurgy
This book presents technical articles tracing the birth and growth trajectory of metallurgical science, engineering, and t...
Anti-Viral Metabolites from Medicinal Plants
Anti-Viral Metabolites from Medicinal Plants
This reference work provides a comprehensive overview of the anti-viral metabolites produced by medicinal plants.
Advances in Mechanism and Machine Science
Advances in Mechanism and Machine Science
This book gathers the proceedings of the 16th IFToMM World Congress, which was held in Tokyo, Japan, on November 5-10, 2023.
Proceedings of SECON’23
Proceedings of SECON’23
This book gathers proceedings of the 4th Int'l Conf. on Structural Engineering and Construction Management (SECON’23), Ang...
Organization in Biology
Organization in Biology
This open access book assesses prospects of (re)adopting biological organization as pivotal concept which can nourish thin...
Emerging Nanodielectric Materials for Energy Storage
Emerging Nanodielectric Materials for Energy Storage
This contributed volume overviews the synthesis of emerging nanodielectric materials and examines their use in energy stor...
Bacterial Secretion Systems
Bacterial Secretion Systems
This second edition details new and updated protocols that cover techniques used to study secretion systems. Chapters focu...
Modern Building Materials, Structures and Techniques
Modern Building Materials, Structures and Techniques
This volume gathers the proceedings of the ​Intl. Conf. Modern Building Materials, Structures and Techniques (MBMST), Viln...
Poly(Vinyl Chloride) Based Composites and Nanocomposites
Poly(Vinyl Chloride) Based Composites and Nanocomposites
This book covers Poly(vinyl chloride) Fundamentals, Fabrication and characterization of PVC based composites and nanocompo...
Advances in Engineering Materials
Advances in Engineering Materials
This volume comprises select proceedings of FLAME22 focusing on fluids, mechatronics, control and robotics, material scien...
Single Molecule Analysis
Single Molecule Analysis
​This volume discusses the latest techniques and developments like optical tweezers, single-molecule fluorescence tools, a...
Load More
format_indent_increase