K. Masuko, M. Shigematsu, T. Hashiguchi, D. Fujishima, M. Kai, N. Yoshimura, S. Okamoto, Achievement of more than 25% conversion efficiency with crystalline silicon heterojunction solar cell. IEEE J. Photovolt. 4(6), 1433–1435 (2014)
K.M. Anoop, T.N. Ahipa, Recent advancements in the hole transporting layers of perovskite solar cells. Sol. Energy. 263, 111937 (2023)
M. Dey, M. Dey, N.K. Das, A.S. Gupta, M.A. Matin, N. Amin, Performance improvement of highly stable molybdenum telluride solar cells with CZT BSF. In 2017 International Conference on Electrical, Computer and Communication Engineering (ECCE) (pp. 941–975). IEEE, (2017, February)
N. Amin, Introduction of inorganic solar cells. Comprehensive Guide on Organic and Inorganic Solar Cells (57–63). Academic, (2022)
S. Mekhilef, R. Saidur, A. Safari, A review on solar energy use in industries. Renew. Sustain. Energy Rev. 15(4), 1777–1790 (2011)
Kelzenberg, M. D., Boettcher, S. W., Petykiewicz, J. A., Turner-Evans, D. B., Putnam,M. C., Warren, E. L.,… Atwater, H. A., Enhanced absorption and carrier collection in Si wire arrays for photovoltaic applications. Nature materials, 9(3), 239–244, (2010)
P.K. Dakua, D.K. Panda, Implementation of zinc sulfide (ZnS) as a suitable buffer layer for CZTS solar cell from numerical analysis. In Micro and Nanoelectronics Devices, Circuits and Systems: Select Proceedings of MNDCS 2022 (pp. 257–264). Singapore: Springer Nature Singapore, (2022)
M. Akhtaruzzaman, V. Selvanathan, M. Shahiduzzaman, M.I. Hossain, Introduction to organic-inorganic hybrid solar cells. Comprehensive Guide on Organic and Inorganic Solar Cells (187–193). Academic, (2022)
N. Ahn, D.Y. Son, I.H. Jang, S.M. Kang, M. Choi, N.G. Park, Highly reproducible perovskite solar cells with average efficiency of 18.3% and best efficiency of 19.7% fabricated via Lewis base adduct of lead (II) iodide. J. Am. Chem. Soc. 137(27), 8696–8699 (2015)
M. Burgelman, P. Nollet, S. Degrave, Modelling polycrystalline semiconductor solar cells. Thin Solid Films. 361–362, 527–532 (2000)
S.E. Tsoeu, First-Principles Design of Hybrid Carbon Nitride (C2n) with Gallium Sulphide and Gallium Selenide Two-Dimensional (2D) Materials as High-Performance Photovoltaic Cells (University of Johannesburg (South Africa), 2021)
R. Meena, L.K. Lata, P.K. Jain, S.S. Sethi, Design and simulation of a CdTe/C2N/SnO2 trilayer photovoltaic cell via SCAPS-1D. Curr. Eng. Lett. Reviews. 1(1), E140923221095 (2024)
Z. Xiao, Q. Dong, C. Bi, Y. Shao, Y. Yuan, J. Huang, Solvent annealing of perovskite-induced crystal growth for photovoltaic-device efficiency enhancement. Adv. Mater., 26(37),(2014)
Dakua, P. K., Dash, R. K., Laidouci, A., Bhattarai, S., Dudekula, U., Kashyap, S.,… Rashed, A. N. Z., Evaluating CZTS Solar Cell Performance Based on Generation and Recombination Models for Possible ETLs Through Numerical Analysis. Journal of Electronic Materials, 53(4), 2015–2025,(2024)
Z. Kothandapani, M.A. Islam, Y. Reza, A.A. Hasana, N. Amin, Optimization of Cu2O and cuscn as HTL of planar perovskite solar cells via numerical simulation. J. Ovonic Res. 16(6), 369–377 (2020)
P.K. Dakua, D.K. Panda, Improving the efficiency of ZnO/WS2/CZTS1 solar cells using CZTS2 as BSF layer by SCAPS-1D numerical simulation. Phys. Scr. 98(8), 085402 (2023)
Z. Guan, C.S. Lian, S. Hu, S. Ni, J. Li, W. Duan, Tunable structural, electronic, and optical properties of layered two-dimensional C2N and MoS2 Van der Waals heterostructure as photovoltaic material. J. Phys. Chem. C 121(6), 3654–3660 (2017)
M.A. Kishore, P. Ravindran, Enhanced photocatalytic water splitting in a C2N monolayer by C-site isoelectronic substitution. ChemPhysChem. 18(12), 1526–1532 (2017)
X. Wang, Y. Wang, R. Quhe, Y. Tang, X. Dai, W. Tang, Designing strained C2N/GaTe (InTe) heterostructures for photovoltaic and photocatalytic application. J. Alloys Compd. 816, 152559 (2020)
A.K. Patel, R. Mishra, S.K. Soni, Efficiency enhancement of CIGS solar cell with C 2 N buffer layer: A simulation approach by SCAP-1D. In >2023 First International Conference on Microwave, Antenna and Communication (MAC) (pp. 1–5). IEEE, (2023, March)
X. He, Y. Song, L. Wu, C. Li, J. Zhang, L. Feng, Simulation of high-efficiency CdTe solar cells with Zn1-xMgxO window layer by SCAPS software. Mater. Res. Express. 5(6), 065907 (2018)
P.K. Dakua, D.K. Panda, S. Kashyap, A. Laidouci, Sadanand., simulation and numerical modeling of high-efficiency CZTS solar cells with a BSF layer. Int. J. Numer. Model. Electron. Networks Devices Fields. 37(2), e3188 (2024)
A. Laidouci, V.N. Singh, P.K. Dakua, D.K. Panda, Performance evaluation of ZnSnN2 solar cells with Si back surface field using SCAPS-1D: A theoretical study. Heliyon, 9(10),(2023)
Singh, A., Srivastava, V., Agarwal, S., Lohia, P., Dwivedi, D. K., Umar, A.,… Dakua,P. K., Enhancing the performance of lead-free La2NiMnO6 double perovskite solar cells through SCAPS-1D optimization. Journal of Optics, 53(4), 3695–3707, (2024)
O.K. Simya, A. Mahaboobbatcha, K. Balachander, A comparative study on the performance of kesterite based thin film solar cells using SCAPS simulation program. Superlattices Microstruct. 82, 248–261 (2015)
S.E. Tsoeu, F. Opoku, P.P. Govender, Exploring the optical, structural and electronic properties of a Two-Dimensional GaSe/C2N Van der Waals heterostructure as a photovoltaic cell: A computational investigation. J. Electron. Mater. 50(2), 620–628 (2021)
V. Bhojak, L.K. Lata, P.K. Jain, Design and Simulation of C2N based Solar Cell using SCAPS 1D. Recent Developments in Engineering & Technology-II, 130
M. Hosenuzzaman, N.A. Rahim, J. Selvaraj, M. Hasanuzzaman, A.A. Malek, A. Nahar, Global prospects, progress, policies, and environmental impact of solar photovoltaic power generation. Renew. Sustain. Energy Rev. 41, 284–297 (2015)
C.C. Ding, Y.J. Sun, T. Liu, H.D. Li, Q.C. Fan, h2D-C2N/C3B Two-Dimensional heterostructures: A direct Z-Scheme photocatalyst for overall water splitting. J. Phys. Chem. C 128(8), 3377–3383 (2024)
Dakua, P. K., Trabelsi, Y., Dudekula, U., Tripathi, R., Laidouci, A., Pal, A.,…Bhattarai, S., Optimization of efficiency of CZTS-based solar cell through exclusive BSF layer engineering method. Journal of Physics and Chemistry of Solids, 193, 112156, (2024)
X. Zhou, J. Han, Design and simulation of C2N based solar cell by SCAPS-1D software. Mater. Res. Express. 7(12), 126303 (2020)
S.E. Tsoeu, F. Opoku, P.P. Govender, Tuning the electronic, optical and structural properties of GaS/C2N Van der Waals heterostructure for photovoltaic application: first-principle calculations. SN Appl. Sci. 2(3), 341 (2020)
W. Ahmad, W. Farooq, A.D. Khan, A. Alanazi, K. Adnan, Optimization of Thin-Film Carbon Nitride (C2N) Based Solar Cell Via Zn1– xMgxO (as a buffer layer) (2022)
S. Yasin, Z.A. Waar, A. Zoubi, T., M. Moustafa, Optoelectronic simulation of a high efficiency C2N based solar cell via buffer layer optimization. Opt. Mater. 119, 111364 (2021)
Ahmad, W., Farooq, W., Khan, A. D., Jan, S. T., Jasiński, M., Leonowicz, Z.,… Petrov,J., Thin-film carbon nitride (C2N)-based solar cell optimization considering Zn1– xMgxO as a buffer layer. Processes, 11(1), 91, (2022)
S. Yasin, M. Moustafa, A. Zoubi, T. Laouini, G., Z.A. Waar, High efficiency performance of eco-friendly C2N/FASnI3 double-absorber solar cell probed by numerical analysis. Opt. Mater. 122, 111743, (2021)
W. Ahmad, A.D. Khan, W. Ahmad, Design and simulation of High-Efficiency Two-Dimensional carbon nitride (C2N-h2D) solar cell with SnS (HTL) and TiO2 (ETL) via SCAPS-1D, (2022)
A.K. Patel, R. Mishra, S.K. Soni, (2023, March). Efficiency enhancement of CIGS solar cell with C 2 N buffer layer: A simulation approach by SCAP-1D. In 2023 First International Conference on Microwave, Antenna and Communication (MAC) (pp. 1–5). IEEE, (2023)
T.I. Taseen, M. Julkarnain, A.Z.M.T. Islam, Design and simulation of nitrogenated Holey graphene (C2N) based heterostructure solar cell by SCAPS-1D. Heliyon, 10(1), (2024)
Comments (0)