H. O. Pierson, Handbook of refractory carbides and nitrides: properties, characteristics, processing and applications, William Andrew, 1996.

K. Zeng and R. Schmid-Fetzer, Thermodynamic assessment and applications of Ti-V-N system, Mater. Sci. Technol., 14, 1083 (1998); https://doi.org/10.1179/mst.1998.14.11.1083.

L. Tsetseris, S. Logothetidis, and S. T. Pantelides, Atomic-scale mechanisms for diffusion of impurities in transition-metal nitrides, Surf. Coat. Technol., 204, 2089 (2010); https://doi.org/10.1016/j.surfcoat.2009.09.002.

S. Sun et al., First Principles Study of Mechanical Properties and Electronic Structures of Vanadium‐Doped TiC and TiN, Adv. Eng. Mater., 20, 1800295 (2018); https://doi.org/10.1002/adem.201800295.

B. A. Latella, B. K. Gan, K. E. Davies, D. R. McKenzie, and D. G. McCulloch, Titanium nitride/vanadium nitride alloy coatings: mechanical properties and adhesion characteristics, Surf. Coat. Technol., 200, 3605 (2006); https://doi.org/10.1016/j.surfcoat.2004.09.008.

G. Hyett, M. A. Green, and I. P. Parkin, An Investigation of Titanium‐Vanadium Nitride Phase Space, Conducted Using Combinatorial Atmospheric Pressure CVD, Chem. Vap. Deposition, 14, 309 (2008); https://doi.org/10.1002/cvde.200806705.

G. M. Matenoglou et al., Structure, stability and bonding of ternary transition metal nitrides, Surf. Coat. Technol., 204, 911 (2009); https://doi.org/10.1016/j.surfcoat.2009.06.032.

V. Petrman and J. Houska, Trends in formation energies and elastic moduli of ternary and quaternary transition metal nitrides, J. Mater. Sci., 48, 7642 (2013); https://doi.org/10.1007/s10853-013-7582-4.

G. Abadias, Ph. Djemia, and L. Belliard, Alloying effects on the structure and elastic properties of hard coatings based on ternary transition metal (M = Ti, Zr or Ta) nitrides, Surf. Coat. Technol., 257, 129 (2014); https://doi.org/10.1016/j.surfcoat.2014.08.022.

M. G. Brik and C.-G. Ma, First-principles studies of the electronic and elastic properties of metal nitrides XN (X= Sc, Ti, V, Cr, Zr, Nb), Comput. Mater. Sci., 51, 380 (2012); https://doi.org/10.1016/j.commatsci.2011.08.008.

Z. T. Y. Liu, B. P. Burton, S. V. Khare, and D. Gall, First-principles phase diagram calculations for the rocksalt-structure quasibinary systems TiN–ZrN, TiN–HfN and ZrN–HfN, J. Phys.: Condens. Matter, 29, 035401 (2016); https://doi.org/10.1088/0953-8984/29/3/035401.

F. Gao, Hardness of cubic solid solutions, Sci. Rep., 7, 40276 (2017); https://doi.org/10.1038/srep40276.

S. F. Pugh, XCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals, Philos. Mag., 45, 823 (1954); https://doi.org/10.1080/14786440808520496.

J. W. D. Connolly and A. R. Williams, Density-functional theory applied to phase transformations in transition-metal alloys, Phys. Rev. B, 27, 5169 (1983); https://doi.org/10.1103/PhysRevB.27.5169.

P. Prysyazhnyuk et al., Analysis of the effects of alloying with Si and Cr on the properties of manganese austenite based on AB INITIO modelling, East.-Eur. J. Enterp. Technol., 6, 28 (2020); https://doi.org/10.15587/1729-4061.2020.217281.

A. van de Walle et al., Efficient stochastic generation of special quasirandom structures, Calphad, 42, 13 (2013); https://doi.org/10.1016/j.calphad.2013.06.006.

P. Prysyazhnyuk and D. Di Tommaso, The thermodynamic and mechanical properties of Earth-abundant metal ternary borides Mo2 (Fe, Mn) B2 solid solutions for impact-and wear-resistant alloys, Mater. Adv., 4, 3822 (2023); https://doi.org/10.1039/D3MA00313B.

D. L. Lutsak, P. M. Prysyazhnyuk, M. O. Karpash, V. M. Pylypiv, and V. O. Kotsyubynsky, Formation of structure and properties of composite coatings TiB2-TiC-steel obtained by overlapping of electric-arc surfacing and self-propagating high-temperature synthesis, Metallofiz. Noveishie Tekhnol., 38, 1265 (2016); https://doi.org/10.15407/mfint.38.09.1265.

J. Hafner and G. Kresse, The Vienna AB-Initio Simulation Program VASP: An Efficient and Versatile Tool for Studying the Structural, Dynamic, and Electronic Properties of Materials, in Properties of Complex Inorganic Solids, Springer US, 69 (1997); https://doi.org/10.1007/978-1-4615-5943-6_10.

J. W. Furness, A. D. Kaplan, J. Ning, J. P. Perdew, and J. Sun, Accurate and numerically efficient r2SCAN meta-generalized gradient approximation, J. Phys. Chem. Lett., 11, 8208 (2020); https://doi.org/10.1021/acs.jpclett.0c02405.

H. J. Monkhorst and J. D. Pack, Special points for Brillouin-zone integrations, Phys. Rev. B, 13, 5188 (1976); https://doi.org/10.1103/PhysRevB.13.5188.

A. van de Walle, M. Asta, and G. Ceder, The alloy theoretic automated toolkit: A user guide, Calphad, 26, 539 (2002); https://doi.org/10.1016/s0364-5916(02)80006-2.

[23] V. Wang, N. Xu, J.-C. Liu, G. Tang, and W.-T. Geng, VASPkit: A user-friendly interface facilitating high-throughput computing and analysis using VASP code, Comput. Phys. Commun., 267, 108033 (2021); https://doi.org/10.1016/j.cpc.2021.108033.

Y. Tian, B. Xu, and Z. Zhao, Microscopic theory of hardness and design of novel superhard crystals, Int. J. Refract. Met. Hard Mater., 33, 93 (2012); https://doi.org/10.1016/j.ijrmhm.2012.02.021.

P. Giannozzi et al., QUANTUM ESPRESSO: a modular and open-source software project for quantum simulations of materials, J. Phys.: Condens. Matter, 21, 395502 (2009); https://doi.org/10.1088/0953-8984/21/39/395502.