Jivraj S (2018) Screw versus cemented implant restorations: the decision-making process. J Dent Implant 8:9–19

Article  Google Scholar 

Khazaei S, Iranmanesh P, Nasri N, Abedian A, Ghasemi E (2014) Stress analysis of different prosthesis materials in implant-supported fixed dental prosthesis using 3D finite element method. Dent Hypotheses 5:109–114

Article  Google Scholar 

Schwitalla AD, Abou-Emara M, Spintig T, Lackmann J, Müller WD (2015) Finite element analysis of the biomechanical effects of PEEK dental implants on the peri-implant bone. J Biomech 48:1–7

Article  CAS  PubMed  Google Scholar 

Soliman TA, Tamam RA, Yousief SA, El-Anwar MI (2015) Assessment of stress distribution around implant fixture with three different crown materials. Tanta Dent J 12(4):249–258

Article  Google Scholar 

Geng JP, Tan KB, Liu GR (2001) Application of finite element analysis in implant dentistry: a review of the literature. J Prosthet Dent 85:585–598

Article  CAS  PubMed  Google Scholar 

Sarot JR, Contar CM, Cruz AC, de Souza MR (2010) Evaluation of the stress distribution in CFR-PEEK dental implants by the three-dimensional finite element method. J Mater Sci Mater Med 21:2079–2085

Article  CAS  PubMed  Google Scholar 

Isidor F (2006) Influence of forces on peri-implant bone. Clin Oral Implants Res 17(S2):8–18

Article  PubMed  Google Scholar 

Kitamura E, Stegaroiu R, Nomura S, Miyakawa O (2004) Biomechanical aspects of marginal bone resorption around osseointegrated implants: considerations based on a three-dimensional finite element analysis. Clin Oral Implants Res 15(4):401–412

Article  PubMed  Google Scholar 

Sevimay M, Turhan F, Kiliçarslan MA, Eskitascioglu G (2005) Three-dimensional finite element analysis of the effect of different bone quality on stress distribution in an implant-supported crown. J Prosthet Dent 93:227–234

Article  CAS  PubMed  Google Scholar 

Himmlová L, Dostálová T, Kácovský A, Konvicková S (2004) Influence of implant length and diameter on stress distribution: a finite element analysis. J Prosthet Dent 91:20–25

Article  PubMed  Google Scholar 

Inci SD, Turp V, Tuncelli FB (2024) Stress distribution in peri-implant bone, implants, and prostheses: 3D-FEA of marginal bone loss and prosthetic design. Braz Dent Sci 27(2):e4168

Article  Google Scholar 

Sayed AJ, Garg KK, Mohan SR, Khan Tareen SU, Shiva Shankar B, Omran MH (2024) Influence of implant location, number, and design in ischemic zone for implant prosthesis success rate: a comparative three-dimensional finite element analysis. Cureus 16(2):1–12

Google Scholar 

Chakraborty A, Sahare KD, Majumder S, Chowdhury AR (2024) Understanding the biomechanical response of progressive thread dental implants using multi-scale finite element analysis. Int J Multiscale Comput Eng 22(4):31–44

Article  Google Scholar 

Silva GC, Cornacchia TM, de Magalhães CS, Bueno AC, Moreira AN (2014) Biomechanical evaluation of screw- and cement-retained implant-supported prostheses: a nonlinear finite element analysis. J Prosthet Dent 112:1479–1488

Article  PubMed  Google Scholar 

Zarone F, Russo S, Sorrentino R (2011) From porcelain-fused-to-metal to zirconia: clinical and experimental considerations. Dent Mater 27:83–96

Article  CAS  PubMed  Google Scholar 

Lan TH, Liu PH, Chou MM, Lee HE (2016) Fracture resistance of monolithic zirconia crowns with different occlusal thicknesses in implant prostheses. J Prosthet Dent 115:76–83

Article  CAS  PubMed  Google Scholar 

Guess PC, Att W, Strub JR (2012) Zirconia in fixed implant prosthodontics. Clin Implant Dent Relat Res 14:633–645

Article  PubMed  Google Scholar 

Vigolo P, Mutinelli S, Givani A, Stellini E (2012) Cemented versus screw-retained implant-supported single-tooth crowns: a 10-year randomised controlled trial. Eur J Oral Implantol 5:355–364

PubMed  Google Scholar 

Chee W, Jivraj S (2006) Screw versus cemented implant supported restorations. Br Dent J 201:501–507

Article  CAS  PubMed  Google Scholar 

AlHelal A, Kattadiyil MT, Clark JL, AlBader B (2017) Diagnostic classification and design considerations for implant-supported fixed partial dentures and screw access channel: The ABC/PBC and SAC classifications. Int J Prosthodont 30:490–495

Article  PubMed  Google Scholar 

Michalakis KX, Hirayama H, Garefis PD (2003) Cement-retained versus screw-retained implant restorations: a critical review. Int J Oral Maxillofac Implants 18:719–728

PubMed  Google Scholar 

Shadid R, Sadaqa N (2012) A comparison between screw- and cement-retained implant prostheses. A Lit Rev J Oral Implantol 38:298–307

Article  Google Scholar 

Pauletto N, Lahiffe BJ, Walton JN (1999) Complications associated with excess cement around crowns on osseointegrated implants: a clinical report. Int J Oral Maxillofac Implants 14:865–868

CAS  PubMed  Google Scholar 

Agar JR, Cameron SM, Hughbanks JC, Parker MH (1997) Cement removal from restorations luted to titanium abutments with simulated subgingival margins. J Prosthet Dent 78:43–47

Article  CAS  PubMed  Google Scholar 

Rajan M, Gunaseelan R (2004) Fabrication of a cement- and screw-retained implant prosthesis. J Prosthet Dent 92:578–580

Article  PubMed  Google Scholar 

Nissan J, Snir D, Rosner O, Kolerman R, Chaushu L, Chaushu G (2016) Reliability of retrievable cemented implant-supported prostheses. J Prosthet Dent 115:587–591

Article  CAS  PubMed  Google Scholar 

Clelland NL, Lee JK, Bimbenet OC, Gilat A (1993) Use of an axisymmetric finite element method to compare maxillary bone variables for a loaded implant. J Prosthodont 2(3):183–189

Article  CAS  PubMed  Google Scholar 

Barbier L, Vander SJ, Krzesinski G, VanDer Perre ES (1998) Finite element analysis of non-axial versus axial loading of oral implants in the mandible of the dog. J Oral Rehabil. 25(11):847–58

Article  CAS  PubMed  Google Scholar